Custom Built-In Wood Cabinets for Attic Bedroom

Built-In Drawers and Shelving, Custom Cabinetry

Designer: Brandon Gatti

Materials: White Oak, Clear conversion varnish

Location: West Roxbury, MA

The owner of this upscale, 3-story, 6 bedroom colonial home engaged Grain for a custom fit. The bank of drawers spans the entire wall of the bedroom loft, providing additional storage. The challenge was that the drawer units were installed in the attic living area. Therefore, each drawer had to be built and sized appropriately to accommodate the slope of the wall / roof.

All maple drawers were inset into the frame, providing a clean and uniform look. The white oak countertop was finished with a clear coat to bring out the natural beauty of the white oak. The cabinets were finished off with a Benjamin Moore high quality paint and brass drawer pulls.

Prime ATC Dispensary

Prime ATC

Architect: Gregory J. O’Connor Associates, Inc.

Materials: Butternut, black melamine, mill finish steel

Location: New Hampshire

Fabrication and build-out of a medicinal marijuana storefront using butternut wood throughout which provided a warm and inviting look and feel. The project included cabinet work with glass showcases, shelf and storage system, desks, benchwork and wall coverings.

The Pioneer – Amenity Space Work Area

Architect: Beinfield Architecture

Materials: Solid white oak with satin finish

Location: Everett, MA

An additional amenity space was created with table tops for people to hang out and work. Grain fabricated the solid white oak table tops with a satin finish and finished with upholstered seating.

Noodle Lab

Noodle Lab – Boston Public Market

Architect: Skeema Design

Materials: Plastic laminate, Aluminum

Location: Boston Public Market, Boston, MA

Grain fabricated Noodle Lab’s food stall in the market, larger point of sale counter, and food prep area, high pressure laminate, cabinets functional black laminate from service side. Palm and aluminum facade from the customer side.

The Rising

The Rising Bar

Architect: AP Keaton (Brand Marketing)

Materials: Walnut, flexible plywood

Location: Inman Square, Cambridge, MA

This project was to build a custom Whiskey Bar into a larger bar space. A radius die wall was constructed for the bar top and back bar shelving. The radius bar top was fabricated with walnut veneer plywood, complemented with solid walnut nosing and a gloss finish applied and buffed out. Bench seating was upholstered in leather.